Menu
Modulift
Modular Transport Set MODULIFT with hydraulic hoisting drive is intended to be installed in transport sets of suspended railways, and to be used for hoisting and holding loads of up to 32.0 tons on a specific height. The modular transport set is adapted to moving along driving tracks of suspended railways and works with pulling or pushing devices of a force not exceeding 120 kN.
| Length of track needed for set assembly | 12,7 [m] |
| Height | 0,6 [m] |
| Width (min/max) | 0,65/1,8 [m] |
| Kerb weight | Max. 6550 [kg] |
| Maximum hoisting capacity | 32 [Mg] |
| Hoisting height (standard 3 m) | Max. 6 [m] |
| Hoisting speed | 1,5 [m/min] |
| Maximum pulling force of a coupler | 120 [kN] |
| Maximum track inclination | ± 25 [°] |
| Minimum track curvature radius in a plane - horizontal | > 4,0 [m] |
| Minimum track curvature radius in a plane - vertical | > 8,0 [m] |
| Driving rail profile | 1155 (1140) |
| Chain hoist drive | Hydrostatic |
| Type of medium | L-HL 32 (L-HL 46) |
| Working medium consumption | 21 [dm3/min] |
| Effective operating pressure (working) | 12 [MPa] |
| Supply pressure | 20 [MPa] |
| Hoisting capacity of chain hoist | Max. 8 [t] |
| Number of chain hoists | Max. 4 |